next up previous contents index
Next: STORE QUALITY Up: STORE Previous: STORE FLUX   Contents   Index


        CLIC\STORE PHASE [/BAND code] [/SELF] [/RECEIVER irec]


    Store  the phase calibration determined by the last SOLVE PHASE command.

    One calibration curve is stored for each sideband.  With  option  "/BAND
    code",  one  may  use  the  calibration curve determined with one of the
    sidebands (`code' is UPPER or USB, LOWER or LSB, or AVERAGE or DSB),  to
    calibrate both sidebands.

    With  option "/SELF", the calibration stored will not be the calibration
    curve (as determined from the last SOLVE PHASE command)  but,  for  each
    scan,  the  visibility  corresponding to the first subband set (eg., SET
    SUB L01 to L03 ...); data from each side band will be used to  calibrate
    the  same  side  band. This provide a simple, easy way to self-calibrate
    data taken on strong continuum sources (quasars).

    With option "/RECEIVER irec", the calibration curves solved  using  data
    from  receiver "irec" will be stored in parallel with any other calibra-
    tion curve.  This phase curve will be selected by giving SET  PHASE  EX-
    TERNAL  (see this command). In practice, this is used for Receiver 2 da-
    ta, for which the  calibration  curve  determined  with  Receiver  1  is
    stored. /BAND may be used in conjunction with /RECEIVER.

    STORE  PHASE  and  STORE AMPLITUDE can be performed simultaneously using
    STORE AMPLITUDE PHASE [/BAND code] [/SELF] [/RECEIVER  irec]  (the  /RE-
    CEIVER option has no meaning for amplitudes).

Gildas manager 2019-02-18